hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories
Removing and Replacing an Audio Card
Chapter 2
52
Removing and Replacing an Audio Card
This section explains how to remove and replace an audio card from the PCI/AGP cage.
Removing an Audio Card
To remove an audio card, complete the following steps:
1. Turn off the system and disconnect all power and external cables.
2. Follow steps two through four of the section “Removing an Accessory Card” in this
chapter (refer to page 49 for instructions).
3. Unscrew the bulkhead screw that holds the audio card in place and unplug the audio
cable. See Figure 2-22.
Figure 2-22 Removing the Audio Card’s Cable
4. Grasp the bulkhead end of the card and lift the card out of its connector. See
Figure 2-23.
Figure 2-23 Removing an Audio Card
Bulkhead
Screw
Audio Connector
Audio Cable
Audio Card