hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories
Removing and Replacing the System Fans
Chapter 2
65
Removing a System Fan
To remove a system fan, follow these steps:
1. Remove the system’s access panel(s) (refer to page 37 or page 41 for instructions).
2. Grasp the fan module that needs to be replaced with your index finger and thumb
and lift it out of its fan slot. Note that each of the fan modules has indentations for
grasping them with your index finger and thumb. See Figure 2-43.
Figure 2-43 Removing a System Fan
Figure 2-44 Removing Fans 1A, 1B or 2 from a zx6000 Tower System
3. Replace the fan. See the subsequent section “Replacing a System Fan.“
Fan 1A
Fan 1B
Fan 2 Fan 3
Unplugging the fans power connector
Removing the fan from the system