hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories
Removing and Replacing the Processor Airflow Guide
Chapter 2
68
3. Place one finger in the opening on top of the processor airflow guide, and using the
other hand grasp the back end of the airflow guide. Next, lift the processor airflow
guide out of the system. See Figure 2-46. Note that the front part of the processor
airflow guide has two retaining tabs on it that are inserted into two slots on the front
half of the airflow guide. When you lift up on the main airflow guide the tabs release
themselves from the two slots.
Figure 2-46 Removing the Main Airflow Guide
4. Remove system fans 1A and 1B (refer to page 65 for instructions). Next, press
inward on the blue clip on the release latch. See the large arrow in the right half of
Figure 2-47.
Figure 2-47 Disconnecting the Airflow Guide’s Release Lever
Retaining TabsMain Airflow
Guide
Front Half of
the Airflow
Guide
Front Half of Airflow Guide
Release Latch and Post