hp workstations zx6000, hp server rx2600 - operation and maintenance guide

Installing or Replacing Parts and Accessories
Removing and Replacing the System Board
Chapter 2
85
4. Screw in the system board’s mounting screw. See Figure 2-69. To help you locate
where the system board’s mounting screw should be placed, there is a screw symbol
adjacent to the mounting screw hole.
5. Connect all cables to their appropriate connectors on the system board. See
Figure 2-73.
Figure 2-73 Connect the System Board Cables to their Connectors
SCSI Connector B SCSI Connector A
IDE
Connector
PCI Fan 3
and Power
Supply Fan 2
Connector
Hard Drive
Power
Connector
Power
Connector
for the Fan 1
and Hard
Drives
System
Board
Power
Connecto
r
Power
Connecto
r
for the
Processo
r
Fan (for
Power
Connecto
r
for the
Processo
r
Power
Module
LED Status Panel
Connector
CPU 0)