hp workstations zx6000, hp server rx2600 - operation and maintenance guide

System Conﬁguration

Extensible Firmware Interface (EFI)

Chapter 3

EFI Shell Option

If you select the “EFI Shell” option, you will see information similar to this on your

display:

EFI Shell version 1.10 [14.57]

Device mapping table

fs0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig00112233)

blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)

blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)

blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig00112233)

At the “Shell>” prompt, you can choose to enter EFI shell commands or create EFI shell

scripts. You may also wish to boot the operating system by typing the appropriate

operating system name hpux for HP-UX and pressing Enter.

Boot Option Maintenance Menu

This section covers the Boot option maintenance menu. This menu allows you to

select console output and input devices as well as various boot options.

Here is the Boot option maintenance menu that provides a large list of selections you

can make to conﬁgure your system. When you select one of these menu items, you will be

provided with another menu from which to select your choice of options. Subsequent

sections show these menus.

EFI Boot Maintenance Manager ver 1.10 [14.57]

Main Menu. Select an Operation

Boot from a File

Add a Boot Option

Delete Boot Option(s)

Change Boot Order

Manage BootNext setting

Set Auto Boot TimeOut

Select Active Console Output Devices

Select Active Console Input Devices

Select Active Standard Error Devices

Cold Reset

Exit

Timeout-->[7] sec SystemGuid-->[G0]

SerialNumber-->[(null)]