Internal Cabling Guide for NetRAID-2M on an HP Server rx2600[HP S&C DVD 1.03]

Installing the HP NetRAID-2M Card
1. If the server is running, shut down the OS and power off the server.
2. Remove the server's side cover (if you have a tower system) and metal system cover as
described in the server's operation and maintenance guide.
3. Lift up the PCI cage release lever along with the back edge of the PCI cage, and lift the
PCI cage out of the system. See Figure 2.
Figure 2: Removing the PCI Cage
4. Grasp the PCI cage cover and slide it away from the bulkhead end of the PCI cage. Lift
the cover off the PCI cage as shown in Figure 3.
Figure 3: Removing the PCI Cage Board Cover
6
HP CONFIDENTIAL Codename: Longs Peak Part Number: 5971-4217 Last Saved On: 4/2/03 2:24 PM