hp integrity rx2600 and hp integrity rx5670 Management Processor Card Firmware Upgrade Product Update Manufacturing Part Number: rx2600rx56xx_update September 2003 U.S.A. © Copyright 2003, Hewlett-Packard Development Company, L.P..
Warranty and Support Refer to the warranty statement provided with your original HP Server system documentation for the warranty limitations, customer responsibilities, and other terms and conditions. HP Repair and Telephone Support Refer to the Warranty & Support for your HP Server booklet supplied with your HP Server system documentation for instructions on how to obtain HP repair and telephone support.
Management Processor Card Firmware Introduction 1 Management Processor Card Firmware Introduction This document is intended to provide information on the supported operating environment for the management processor (MP) and to provide installation instructions for upgrading the MP processor card firmware to the latest release: • MP features • Supported browsers • Additional commands available for the MP processor card firmware Management Processor Card Firmware Features The MP processor card feature
Management Processor Card Firmware Management Processor Card Firmware Features • WEB console The display mirroring is implemented by sending, for each console client connected to the MP CO command, the same console output data flow. Keyboard sharing is implemented by merging all inputs coming from each console client connected to the MP. The MP allows only one user to have write access to the shared console at a time.
Management Processor Card Firmware Management Processor Card Firmware Browser Support Management Processor Card Firmware Browser Support The following browsers are supported by the Management Processor Card firmware: Operating System Browser Version HP-UX 11i Windows 11 2000 98 LINUX 95 NT MONZILLA 0.9.9 INTERNET EXPLORER 6.0 X X 5.5 X X X X 5.01 X X X X 6.2.3 X X X X NETSCAPE 6.2.1 (Requires GTK and 1.2.10 Support Library) 2.
Management Processor Card Firmware CE: LOG REPAIR INFO IN HISTORY BUFFER Menu-Based Command Interface The menu-based command interface allows repair and firmware update messages to be logged from the same input screen. A sample session follows.
Management Processor Card Firmware FP: FRONT PANEL PROCESS FP: FRONT PANEL PROCESS This command allows the modification of the state of the front panel. Specifically, it provides the ability to turn off the Fault and Attention LEDs, as well as turn on/off the Locator LED. Menu-Based Command To modify the front panel using the menu-based commands, complete the following procedure: MP Host Name: hqiasle8 MP:CM> FP This command allows a user modify the state of the front panel.
Management Processor Card Firmware FP: FRONT PANEL PROCESS FLASH GREEN ON LED State: Running non-OS code. MP Host Name: hqiasle8 MP:CM> Command Line Interface The following table lists the LED commands available from the command line interface: Condition Command Result Turn off Fault fp -f off Fault conditions are no longer reported.
Management Processor Card Firmware MA: RETURN TO MAIN MENU MA: RETURN TO MAIN MENU The MA command causes the MP to return to the non-mirrored Main Menu. It is the same as executing the Ctrl-B command from the keyboard. EXIT is an alias for this command.
Management Processor Card Firmware XU: MP FIRMWARE UPDATE (FW Command) XU: MP FIRMWARE UPDATE (FW Command) The XU command activates the upgrade mode. It serves as an alias for the FW command. It is only available from the LAN port and the local serial port. Upgrade is performed through the MP LAN by FTP, which must therefore be operational. Information required for the upgrade needs to be entered through the FW command interface.
Management Processor Card Firmware Upgrade Introduction 2 Management Processor Card Firmware Upgrade Introduction This document is intended to provide information on the supported operating environment for MP and to provide installation instructions for upgrading the MP Processor Card Firmware to the latest release: • The procedure for determining your current Management Processor Card Firmware version is described. • The procedure for upgrading the MP Processor Card Firmware is explained.
Management Processor Card Firmware Upgrade Unpacking the Firmware Unpacking the Firmware Before unpacking this upgrade, verify that the MP Firmware version is at E.02.10 or above and that the FTP server is available. Instructions are provided for unpacking the firmware on HP UX /Linux Red Hat and Windows systems. Unpacking the Firmware on an HP UX /Linux Red Hat System To unpack the firmware on an HP-UX system, complete the following steps: Step 1.
Management Processor Card Firmware Upgrade Unpacking the Firmware Step 1. Establish a telnet session with the Management Processor. Step 2. Log on to the Management Processor using the Admin password. Step 3. Type ^Ecf to get console write access. Step 4. Type ^b to enter the Management Processor. Step 5. Access the Diagnostic Menu by using the XD command. GSP> xd Step 6. Select 3 to Ping the LAN where the GSP files are located (LAN access PING): Non destructive tests: 1. Parameters checksum 2.
Management Processor Card Firmware Upgrade Unpacking the Firmware n (if using not using anonymous FTP). IE: if root then supply root password -> GSP firmware upgrade in progress ... Retrieved an upgrade file successfully. Programming ROM. Percent Complete: 100. Retrieved an upgrade file successfully. Programming ROM. Percent Complete: 100. Retrieved an upgrade file successfully. Programming ROM. Percent Complete: 100. -> GSP firmware upgrade complete - Web and telnet connections will be dropped. set....
Management Processor Card Firmware Upgrade Using SSL Using SSL SSL allows secure connections to MP using a browser. To use SSL, you must have previously generated a certificate. The MP uses RSA libraries to implement the SSL protocol. SSL uses the following encryption standards: • 1024-bit SSL and 128-bit RC4 encryption of web console data. • RSA keys stored in ANS1 format. • SSL key is 1024 bits. • SSL uses an X509 Certificate stored in ANS1 format.
Management Processor Card Firmware Upgrade Using SSL • Support and have enabled Java plugin 1.3.1_06 To connect to the MP using the HTTPS, complete the following steps: Step 1. Start your browser. Step 2. Access the web console via the secure url: https://ipofgsp/ Step 3. Accept the certificate. You may now access the GSP from any browser from which you have accepted a certificate.
