Manualshelf

Management Processor Card Firmware Upgrade Product Update - HP integrity rx2600 and HP integrity rx5670

ManualsBrandsHP ManualsServerHP Integrity rx2600 Server
12345678910
Management Processor Card Firmware
XU: MP FIRMWARE UPDATE (FW Command)
Chapter 1
10
XU: MP FIRMWARE UPDATE (FW Command)
The XU command activates the upgrade mode. It serves as an alias for the FW command. It is only available
from the LAN port and the local serial port.
Upgrade is performed through the MP LAN by FTP, which must therefore be operational. Information
required for the upgrade needs to be entered through the FW command interface.
If the upgrade process, when started, is interrupted at any time, the core I/O will need to be repaired or
replaced! The MP is reset at the end of the upgrade process.