Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation
112 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Troubleshooting
For system alerts of levels 3-5, the attention condition on the LED can be cleared by accessing
the logs using the
sl or dc command available in the iLO MP command mode.
System alerts of level 7 indicate that the server cannot complete the power-on self test (POST).
See the SL error logs for additional error information. Once corrective action is completed, the
fault LED turns off.
NOTE: Always check the iLO MP Status Logs in the case of a blinking orange or red system
LED before replacing any hardware.
System Logs (SL) Logs
To view the SL logs for detailed diagnostic information, use the iLO MP
sl command:
1. Access the iLO MP command prompt.
2. Run the
sl command. The Event Log Viewer menu displays:
SL
Event Log Viewer:
Log Name Entries % Full Latest Entry
----------------------------------------------------------------
E - System Event 9 1 % 29 Oct 2002 19:15:05
F - Forward Progress 129 3 %
B - Current Boot 82
P - Previous Boot 0
L - Live Events
C - Clear All Logs
Enter your choice or [Q] to Quit:
3. Select e to review the events. The Event Log Navigation menu appears:
Set up alert filter options on this buffer? (Y/[N])
Log Name Entries % Full Latest Entry
-------------------------------------------------------------------
E - System Event 410 47 % 18 Feb 2003 09:38:10
Event Log Navigation Help:
+ View next block (forward in time, e.g. from 3 to 4)
- View previous block (backward in time, e.g. from 3 to 2)
<CR> Continue to the next or previous block
Blinking orange (1/sec.) Attention:
• Alerts of levels 3-5 detected in the iLO MP logs.
• The LED turns off once the event log is read.
Blinking red (2/sec.) Fault:
• System Alert 7 Detected. LED blinks until the problem is
resolved and the server boots successfully or until it is
manually turned off with the iLO MP dc command.
• Fatal hardware error detected by BMC. LED blinks until
problem is corrected.
System LED State