Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 123

Troubleshooting

Four iLO MP LAN LEDs are also on the rear panel if the server has a iLO MP card installed:

System Board Diagnostic LEDs

There are three additional LEDs that can help when troubleshooting the server. These LEDs are

located on the system board close to the back of the server and can be viewed through the small

cooling holes in the server case.

LAN LED Location Color State

1. S e l f - t e s t Pedestal: Right Yellow iLO MP running self test or

error

Rack-mounted: Top Off iLO MP has booted

2. 10BT Pedestal: 2nd from right Green 10 Mb link established

Rack-mounted: 2nd from top Blinking Green 10 Mb activity

Off No link or 100 Mb link

3. 100BT Pedestal: 2nd from left Green 100 Mb link established

Rack-mounted: 2nd from bottom Blinking Green 100 Mb activity

Off No link or 10 Mb link

4. Standby

Power

Pedestal: Left Green Standby power on

Rack-mounted: Bottom Off Standby power off

4321