Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 129
Troubleshooting
EFI Error and Warning Messages
EFI error and warning messages are displayed on the console as part of the boot process.They
can also be retrieved using the
info warnings EFI command.
.
Error Number Error/Warning Message Solution
2 Insufficient resources to assign to one or
more I/O devices
—
3 Failed I/O socket(s) deconfiguration —
4 Unexpected hardware I/O configuration —
7 No BMC installed in platform Ensure the BMC ROM is installed;
update BMC firmware
8 BMC cannot be accessed Check BMC logs for errors
9 One or more BMC ports failed —
10 BMC system event log is full Clear SEL
11 Platform SCR is bad Call support center
12 Set time to BMC SEL failed —
13 SEL get info failed —
14 Initial BMC SEL event failed —
15 Update of BMC buffered data failed —
16 All ACPI BMC ports bad —
17 Read error on BMC token —
18 BMC t oke n tran s mit ch e ck sum error —
19 Error writing BMC token on download —
20 NVM token access error —
21 BMC token write error during NVM write
through
—
22 Error reading BMC token on upload to
NVM
—
23 Error reading BMC first boot token —
24 Primary FIT failed Reflash firmware
25 Secondary FIT failed Reflash firmware
26 PAL_A warning. One copy of PAL is bad Reflash firmware
27 PAL_B warning. Not compatible with at
least one CPU
Update firmware