Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

14 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Overview
Server Features
The rx2600 and zx6000 are available in many configurations. The table below provides an
overview of the server features.
■ For a complete and current list of supported parts, components, and accessories, see:
http://partsurfer.hp.com
■
For information on the specific server features and components on servers with the
following:
❏ Firmware revision 1.9 or lower, use the EFI info command.
❏ Firmware revision 2.0 or higher, see “Advanced System Configuration Menu” (page 38).
Feature Description
Processor Single or dual-processor
• Intel Itanium 2 processor:
•900 MHz with 1.5 MB cache on chip
•1 GHz with 3 MB cache on chip
•1.3 GHz with 3 MB cache on chip
•1.5 GHz with 6 MB cache on chip
Firmware 8 MB flash EEPROM
Configured using Extensible Firmware Interface (EFI)
Operating system Red Hat Linux Advanced Workstation 2.1 for the Itanium® Processor
HP-UX 11i v2
Microsoft Windows:
• XP 64-Bit Edition Version 2003 (zx6000 workstation)
• Server 2003, Enterprise Edition (Integrity rx2600 server)
Main memory Capacity:
• zx6000 workstation: 512 MB minimum (2 x 256 MB)
• rx2600 server: 1 GB minimum (4 x 256 MB)
•24 GB max.
Type: PC2100 ECC registered DDR266 SDRAM
Slots: Twelve DIMM slots
Modules supported: 256 MB, 512 MB, 1 GB, 2 GB
Bus Bandwidth: up to 8.5 GB/s
Hard drives Internal bays: 3 hot-plug SCSI disk bays
Hard disk drives supported:
• 36 GB (10k or 15k rpm)
• 73 GB (15k rpm)
•146 GB (10k rpm)
Maximum internal storage: 438 GB