Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 15
Overview
Optical drives One open bay for 8x slimline DVD or CD-RW/DVD
SCSI controller Two Ultra 320 SCSI channels
One external SCSI port (rear panel):
• 68-pin standard, high density SCSI connector
• Must use cables designated as U320-capable with U320 devices
• 12 m maximum bus length
•SCSI ID:
• May not use SCSI ID 2 when a drive is installed in internal bay 2
• May use SCSI ID 2 for the external port if there is no drive in bay 2
•Termination:
•Must be terminated if there are devices attached
•Must not be terminated if no devices are attached (automatically
terminates if no devices are attached)
• Device support:
•LVD devices
•Legacy SE devices
•SE, narrow devices
IDE controller Ultra ATA-100 capable controller
Supports one IDE optical drive (CD/DVD)
Graphics
controllers
zx6000 workstation supports one of the following options:
•AGP graphics card
• iLO MP card VGA port
rx2600 server:
• iLO MP card VGA port
Accessory card
slots
zx6000 workstation:
• One AGP Pro 4
× 32-bit slot supporting 1.5V AGP cards
• Three 64-bit 133 MHz Peripheral Component Interconnect
(PCI-X 1.0) slots, supporting all bridges and multifunction PCI-X devices; all
three PCI-X slots comply with PCI-X 1.0 specification
rx2600 server:
• Four 64-bit 133 MHz Peripheral Component Interconnect (PCI-X 1.0) slots
Feature Description