Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

16 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Overview
Physical Characteristics
This table lists the standard configuration as shipped, excluding the keyboard and monitor.
iLO Management
Processor (iLO MP)
card
(standard on the
rx2600 server;
optional on the
zx6000
workstation)
25-pin serial connector (with console/remote/USP extensions; requires
breakout cable)
10/100 BT Management LAN
15-pin VGA connector
• The graphics display port functionality on the iLO MP Card is not
supported on zx6000 workstations with an AGP graphics card installed;
all other HP iLO MP Card functionality is supported
Rear connectors
(labeled)
Four USB connectors:
• High speed 480 Mb/sec. capable
• Full speed 12 Mb/sec. and low speed 1.5 Mb/sec.
• HP-UX supports HP USB keyboard and mouse
• Linux supports all 1.1 USB devices
• Windows supports USB keyboard and mouse,
as well as other USB devices with driver support
Two 9-pin serial ports:
•UART 16550 buffered
• RS-232-C
External 68-pin LVDS/SE SCSI connector (see SCSI controller above)
LAN connectors • 10/100 BT Management LAN
• 10/100/1000 BT Gigabit LAN
• 10/100 BT iLO MP Card LAN (on servers with iLO MP card)
Feature Description
Weight:
• Pedestal server Minimum: 22.4 kg (49.4 lb.)
Maximum: 25.5 kg (56.3 lb.)
• Rack-mount server Minimum: 17.5 kg (38.6 lb.)
Maximum: 22.2 kg (49.0 lb.)
Dimensions (DxWxH):
• Pedestal server 67.5 cm (26.6 in.) x 29.5 cm (11.6 in.) x 49.4 cm (19.5 in.)
• Rack-mount server 67.9 cm (26.8 in.) max. x 48.3 cm (19.0 in.) x 8.6 cm (3.4 in.)
Footprint (pedestal)
Rack units (rack-mount)
0.2 m
2
(2.1 sq. ft.)
2U