Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 37
System Configuration
Active Input Device. Hotplug USB keyboard.
(Deselection feature disabled).
* indicates a currently selected device.
■ On server with firmware version 2.0 or higher, the USB keyboard option is always active and
cannot be deselected or disabled.
■ Each option is identified with an EFI device path. Not all options are available, depending on
the configuration of the system and the options purchased. Device paths may differ slightly
on different product models.
■ On both serial device examples, UART 9600 indicates the current baud rate of the serial
device, VenMsg Vt100+ is the current emulation type. Several different terminal emulation
protocols are supported (see list above).
■ Only one terminal emulation type (such as PcAnsi or Vt100) can be selected for each serial
console, but multiple serial consoles can be selected at a time.
Select Active Standard Error Devices
Use this option to define the devices that display error messages from the server console.
This menu is identical to
Console Output Devices. The zx6000/rx2600 does not support
different configurations for Output and Error console. For correct operation, do the following:
■ When changes are made to either Output or Error console menus, the identical change must
be made in both menus.
■ When changing serial devices, changes must be made to Output, Input, and Error menus for
proper operation.
Using the System Configuration Menu
The System Configuration Menu (on servers with EFI firmware version 2.0 or higher)
includes the following options:
■ The Security/Password Menu lets you change the administrator and user passwords.
■ The Advanced System Information Menu displays information about system and
component configuration.
■ Set System Date lets you modify the system date.
■ Set System Time lets you modify the system time.
■ Reset Configuration to Default lets you restore system settings to their original
configuration.
■ Help displays additional information about the available options.
■ Exit returns to the EFI startup menu.
To select: Choose:
Serial A/Serial 1 Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
iLO MP serial console Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+)
USB keyboard Acpi(HWP0002,0)/Pci(1|0)