Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

40 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
System Configuration
EFI Intel Drop Revision: 14.61
EFI Build Revision: 1.22
POSSE Revision: 0.10
ACPI Revision: 7.00
BMC Revision 1.50
IPMI Revision: 1.00
SMBIOS Revision: 2.3.2a
Management Processor Revision:
■ Warning and Stop Boot Information
Blank unless system faults have been identified. See Chapter 4, “Troubleshooting.”
■ Chip Revision Information
Chip Logical Device Chip
Type ID ID Revision
------------------- ------- ------ --------
Memory Controller 0 122b 0023
Root Bridge 0 1229 0023
Host Bridge 0000 122e 0032
Host Bridge 0004 122e 0032
Host Bridge 0005 122e 0032
Host Bridge 0006 122e 0032
Other Bridge 0 0 0002
Other Bridge 0 0 0007
Baseboard MC 0 0 0150
Using the Security/Password Menu
The Security/Password Menu (on servers with EFI firmware version 1.9 or lower) is
identical to the security/password submenu of the
System Configuration Menu.
Resetting Passwords
If you forget a password, you can reset it with an iLO MP command.
To reset a password, follow these steps:
■ If the server has an iLO MP card:
To reset the administrator and user passwords, run the iLO MP card
bp command.
■ If the server does not have an iLO MP card, you must reset the passwords using a jumper on
the system board:
a. Power off the server and unplug the ac power cord.
b. Place a jumper between pins 7 and 8 on J96 on the system board behind the battery.