Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

44 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide

System Configuration

4. Plug in the server. Do not power on the server. Wait for the iLO MP login to display on the

terminal screen.

Accessing the iLO MP Using the iLO MP LAN Port

If you have not already configured your iLO MP LAN port, do so now:

1. Using a telnet client, log on to the system with the hostname provided by your network

administrator.

NOTE: All IP addresses and hostnames should be provided by your network administrator.

For example:

C:\> telnet MP_Hostname

2. Wait for the iLO MP login to display on the telnet screen.

Configuring the iLO MP LAN Port

Before you can run iLO MP commands through a LAN connection, you must configure the LAN

settings on the iLO MP card using a console serial console port connection:

1. Enter iLO MP command mode using a serial console port.

Run the LAN configuration (

LC) command. The LAN Configuration screen for the server

iLO MP firmware revision displays.

❏ iLO MP firmware E.02.10: the screen includes a summary of your current LAN settings

and a prompt:

This command enables you to modify the LAN configuration.

Current configuration:

IP Address : 127.0.0.0

MP Host Name : myhost

Subnet Mask : 200.0.0.0

Gateway : 127.0.1.0

Web Console Port Number : 2023

Do you want to modify the LAN configuration? (Y/[N])

❏

iLO MP firmware E.02.20 or higher: the screen contains a menu including your current

LAN configuration settings:

At each prompt you may type DEFAULT to set default configuration

or Q to Quit

Current LAN Configuration:

-- MAC Address : 0x00306e1ee0dd

I - IP Address : 127.0.0.0

H - MP Host Name : uninitialized

M - Subnet Mask : 255.255.255.0

G - Gateway Address :

L - Link State : Auto Negotiate

W - Web Console Port Number : 2023

Enter Parameter(s) to change, A to modify All, or [Q] to Quit:

2. To modify the LAN settings, follow the prompts on the screen:

❏ IP Address

❏ MP Host name