Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 47

System Configuration

MP login:

NOTE: To switch between the iLO MP card and EFI console with iLO MP firmware E.02.20 or

higher, do the following:

■ If you are at the EFI console, press Ctrl-B to access the iLO MP login screen.

■ If you are at the iLO MP command prompt, run the CO command to enter EFI console

mode.

2. Log in. The login options depend on your iLO MP firmware revision:

❏ iLO MP firmware E.02.10: there are no default iLO MP users. If you have not yet

created iLO MP users, press

Enter at the login and password prompts for initial access.

❏ iLO MP firmware E.02.20 or higher: two default users exist:

◆ Administrator: login Admin, password Admin

◆

Operator: login Oper, password Oper

3. If you have not yet created iLO MP users, enter a default ID and password at the login and

password prompts and press

Enter for initial access.

HP Management Processor

Firmware Revision E.02.11 Feb 14 2003,9:38:32

MP login:

MP password:

To ensure server security, HP recommends that the system administrator do one of the following:

■ Disable all remote access to the iLO MP including telnet, web, and remote modem

access using the

SA command, or use the UC command to configure iLO MP users:

❏ iLO MP firmware E.02.10: Add a user with a unique password on servers

❏ iLO MP firmware E.02.20 or higher: Add a user with a unique password on servers and

delete the default users

Depending on your iLO MP firmware revision, either the command prompt or the menu displays.

❏ iLO MP firmware E.02.10: the iLO MP command mode prompt displays:

HP Management Processor

Firmware Revision E.02.10 Oct 1 2002,10:28:32

System Name: fstl3a

******************************************************************

MP ACCESS IS NOT SECURE

MP users are currently configured and remote access is enabled.

Set up a user with a password (see SO command)

Disable all types of remote access (see EL and ER commands)

************************************************************

MP Host Name: fstl3a

MP>

❏

iLO MP firmware E.02.20 or higher, the main menu displays:

Hewlett-Packard Management Processor