Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

48 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
System Configuration
(c) Copyright Hewlett-Packard Company 1999-2002.
All Rights Reserved.
MP Host Name: iaslhpfc
Revision E.02.11
**************************************************************
MP ACCESS IS NOT SECURE
Default MP users are currently configured and
remote access is enabled.
Modify default users passwords or delete
default users (see UC command)
OR
Disable all types of remote access (see SA command)
**************************************************************
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Create Local Session
HE: Main Help Menu
X: Exit Connection
MP Host Name: iaslhpfc
MP>
4. You can now enter individual commands.
❏ To run an individual command on servers with iLO MP firmware E.02.10, follow these
steps:
a. Enter the command at the iLO MP command prompt.
b. Press
Enter to run the command.
❏ To run an individual command on servers with iLO MP firmware E.02.20 or higher,
follow these steps:
a. To access the command menu prompt, run the
CM command.
b. Enter the command at the prompt.
c. To run the command, press
Enter.
Using the iLO MP Commands
The following sections provide a brief overview of the available commands. For detailed
information, run the
he command.
The iLO MP Help menu displays:
==== MP Help ======================================================
MP Help System
Enter a command at the help prompt:
OVerview : Launch the help overview
LIst : Show the list of MP commands
<COMMAND> : Enter the command name for help on individual
command
TOPics : Show all MP Help topics and commands
HElp : Display this screen