Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

52 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
System Configuration
General iLO MP Configuration Commands
General configuration commands enable you to perform general configuration tasks, such as
configuring automatic system restart and setting the default configuration.
iLO MP Port Configuration Commands
Port configuration commands enable you to configure LAN/WEB, remote/modem, and local
ports.
NOTE: If you are not connecting anything to a port, hardware flow control should be off.
RS System reset from RST signal
TC Transfer of control; system reset through INIT signal
Command Description
CG Generate RSA key pair of self-signed certificate
DC Default configuration
FW Upgrade the iLO MP firmware
ID System identification
IT Inactivity timeout settings
SO Configure security options
UC User configuration
XD Diagnostics or reset of iLO MP
Command Description
Serial Port Configuration
CA Configure serial ports
SA Enable/disable remote and modem access
PG Paging parameter setup
LAN Configuration
SA Enable/disable LAN and web access
LC LAN configuration menu
Command Description