Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 89

Removing and Replacing Components

■ 10/100 BT Management LAN port

■ 15-pin VGA port

■ 25-pin serial port

Removing the iLO MP Card

To remove the iLO MP card, follow these steps:

1. Record the network settings from your iLO MP card before beginning this task.

2. Power off the server, disconnect all power and external cables and remove the covers.

3. Unscrew the two power connector mounting screws (1) and remove the power connector

plate (2) from the back of the server.

Removing the Power Connectors

4. Unscrew the two mounting screws that connect the iLO MP card to the internal chassis post

(1) and the two external mounting screws that are located on both sides of the 25-pin serial

connector (2).

Unscrew the iLO MP Card Mounting Screws

5. Disconnect the iLO MP card connector.