Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 95
Removing and Replacing Components
5. Disconnect the power cable for the processor turbo fan.
Disconnect the Power Cable for the Processor Turbo Fan
6. Unscrew the four heatsink captive screws using the special processor tool (HP Part Number
A7231-67046).
❏ Slide the sequencing retainer plate toward the back of the server to open the hole in the
edge of the turbo fan heatsink for insertion of the special processor tool into the
processor locking mechanism.
Unscrew the Turbo Fan Heatsink Captive Screws
7. Unlock the processor locking mechanism using the special processor tool shipped with your
replacement processor assembly.
Insert the tool into the hole that runs down through the edge of the turbo fan heatsink and
rotate the special processor tool 180 degrees counterclockwise.