Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

96 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Removing and Replacing Components
Unlocking the Processor Locking Mechanism with the Special Processor Tool
8. Remove the turbo fan heatsink and processor from the server.
Removing the Turbo Fan Heatsink and the Processor
Replacing a Processor
To replace a processor, follow these steps:
You must have a processor in socket CPU0 before installing one in socket CPU1.
1. If you are installing a second processor, power off the server, disconnect all power and
external cables and remove the server covers.
2. If you are replacing a processor, remove the old processor.
3. Ensure that the processor locking mechanism is rotated into the unlocked position.
1 Insert special processor tool here
2 The special processor tool rotates this lock underneath the heat sink
3 Unlocked
4 Locked
1
234