Operations and Maintenance Guide, Second Edition - HP Integrity rx2600 Server and HP zx6000 Workstation

HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide 97

Removing and Replacing Components

Processor Locking Mechanism

4. Check to ensure that the processor pins are not bent.

5. Use the four locator posts on the heatsink and the turbo fan power cable to properly align the

fan and processor assembly on the system board. The four locator posts will fit in locator

holes on the system board processor mount. The turbo fan power cable must be positioned so

that it is located on the side of the heatsink that faces the front of the server.

Aligning the Turbo Fan and Processor Assembly

6. Use the special processor tool shipped with your replacement processor assembly to lock the

processor in place on the system board. To do this, insert the special processor tool into the

hole that runs down the side of the heatsink and rotate it clockwise 180 degrees.

1 Unlocked

2 Locked

1 Locator Posts

2 Locator Holes