SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Microsoft Windows Server 2003 for Itanium-based Systems
Table Of Contents
- SmartSetup Scripting Toolkit Deployment Guide
- Table of Contents
- About This Document
- 1 Overview
- 2 Creating a server profile
- 3 Setting up the toolkit environment
- 4 Setting up the boot mechanism
- Using a bootable CD/DVD
- Using a USB flash device
- Using network boot
- Interrupting the SSTK deployment process
- 5 Utilities Reference
specific target servers. For example, you could upload the OS files for the English and the Japanese
versions of the SP1 and non-SP1 versions and install a particular OS based on server selection
criteria.
NOTE: The Integrity SSTK currently supports Microsoft Windows Server 2003, Enterprise
Edition for Itanium-based systems in English and Japanese with and without SP1 or SP2.
Populate the /os/windows/2003-enterprise/ directory with the unmodified contents of
the OS installation CD. If needed, you can create additional directories for other editions or
versions of the OS as a peer to this directory. Figure 2-4 shows the resulting directory structure.
Figure 2-4 /os/windows/2003-enterprise/ Directory
In case you want to configure your repository to enable other Windows OS versions, you must
do the following:
1. Populate the /os/windows/ directory as previously described.
2. Populate the data_files/drivers directory for all desired versions.
The resulting directory structure is as follows:
Upload the OS installation files 21