SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Microsoft Windows Server 2003 for Itanium-based Systems

Table 5-4 Automatic script file options
ValueOption
Defines if you are changing existing arrays and logical drives or adding new ones. This option
is required.
Configure: Existing arrays are not modified. If unassigned physical drives exist, new arrays
and logical drives are automatically created.
Reconfigure: Existing arrays might be modified in a non-data-destructive manner. If
unassigned physical drives exist, existing arrays might automatically be expanded and new
arrays automatically created. New logical drives are created on the expanded and newly
created arrays.
If the -i-with-reset or -reset command line switch is used, the existing controller
configuration is cleared with data loss as the first step in the configurations process, regardless
of the setting of the Action mode.
Action
Defines whether you are in Automatic or Custom mode.
Auto is the default value.
Method
Identifies to which controllers to apply the configuration. This option is required.
Slot [N][:N]: The internal controller with slot number N is used. External controllers can
be identified by appending the Port Number. For example, an MSA1500 connected to a
SA6402 might be found at “Slot 4:2,” where 4 is the internal Slot number and 2 is the SCSI
port.
WWN [N]: The external controller with World-Wide Name (WWN) N is used.
SerialNumber [N]: The shared storage controller with serial number N is used.
All: All detected internal and external controllers in the system are used.
First: The first controller found, based on the controller with the lowest PCI slot number.
IOCabinet [N], IOBay [N], IOChassis [N],Slot [N], Cabinet [N], Cell
[N]: The controller identified by the IPF Slot path information is used.
Use of the -internal” and -external command line switches influences what is regarded
as the first controller. For example, if the -external switch is used, the first controller will
be the first external controller discovered, regardless of the number of internal controllers in
the host system.
Controller
Specifies if the configuration should be cleared. This option causes data loss since it deletes
all logical drives on the controller. Other scripting commands can exist after this option to
recreate a new configuration. This option is optional.
Yes: The configuration is cleared. All arrays and logical drives on the controller are deleted.
No: The configuration is not cleared. This is the default option if the command is not specified
in the script file
ClearConfigurationWithDataLoss
Specifies the RaidArrayID for controllers that support RaidArrayID. This is a user-defined
string to identify controllers. Currently, RaidArrayIDs are only supported by Fibre and
shared-storage controllers.
“XXXXXXXXXXXXXXXXXXXX”
Varying length string that can consist of any of the following characters: a-z, A-Z, 0-9, ! @ #
* ( ) , - _ + : . / [space]
This string has a maximum length that varies depending on the type of controller. For, RA4x00
controllers, the max length is 24 characters. For, other controllers, the max length is 20
characters. The quotes surrounding the string are optional. Using quotes allows leading space
characters to be used in the RaidArrayID. This string cannot end in a space character.
RAIDArrayID
Specifies a license key to install a controller feature.
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
This is a 25-character key separated by hyphens. The hyphens are optional.
LicenseKey
58 Utilities Reference