SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Microsoft Windows Server 2003 for Itanium-based Systems

Table 5-5 Custom script file options (continued)
ValueOption
Specifies a license key to install a controller feature.
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
This is a 25-character key separated by hyphens. The hyphens are optional.
LicenseKey
Specifies a license key to uninstall a controller feature. If the license key
is installed, it will be uninstalled.
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
This is a 25-character key separated by hyphens. The hyphens are optional.
DeleteLicenseKey
Specifies the Read Cache percentage. This option is not required. If this
option is not specified, the Read/Write cache ratio will remain unchanged.
This value is a numeric value from 0 to 100. It must form a valid read/write
cache ratio that is supported on the controller with the WriteCache option.
ReadCache
Specifies the Write Cache percentage. This option is not required. If this
option is not specified, the Read/Write cache ratio will remain unchanged.
This value is a numeric value from 0 to 100. It must form a valid read/write
cache ratio that is supported on the controller with the ReadCache option.
WriteCache
Specifies the Rebuild Priority. This option is not required. If this option is
not specified, the Rebuild Priority will remain unchanged.
• Low
• Medium
• High
RebuildPriority
Specifies the Expand Priority. This option is not required. If this option is
not specified, the Expand Priority will remain unchanged.
• Low
• Medium
• High
ExpandPriority
Specifies the Surface Scan Delay in seconds. This option is not required.
If this option is not specified, the Surface Scan Delay will remain
unchanged.
N: This value is a numeric value between 1 and 30 seconds.
SurfaceScanDelay
Specifies the SSP State for controllers that support SSP that is
enabled/disabled on a controller basis. This option is not required. If this
option is not specified, the SSP State remains unchanged. Currently, only
Fibre and shared-storage controllers support SSP. This command is not
valid for the RA4x00 controller because RA4x00 controllers support SSP
that is enabled/disabled on a logical drive basis.
• Enable: Enables SSP for the controller.
• Disable: Disables SSP for the controller.
SSP only remains enabled if the SSPAdaptersWithAccess command
specifies an adapter for one or more logical drives. If no adapters with
access are specified for any logical drives, the SSP State reverts back to
disabled.
SSPState
62 Utilities Reference