SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Microsoft Windows Server 2003 for Itanium-based Systems
Table Of Contents
- SmartSetup Scripting Toolkit Deployment Guide
- Table of Contents
- About This Document
- 1 Overview
- 2 Creating a server profile
- 3 Setting up the toolkit environment
- 4 Setting up the boot mechanism
- Using a bootable CD/DVD
- Using a USB flash device
- Using network boot
- Interrupting the SSTK deployment process
- 5 Utilities Reference
Options
The hpia64info utility has one option, -v. This option displays the version of the hpia64info
utility.
Output
The hpia64info utility displays the following management processor information:
• Version
• LAN Status
• Host Name
• IP Address
• Netmask
• Gateway
• MAC Address
Thehpia64info utility displays the following system firmware information:
• Asset tag
• BMC (Baseboard Management Controller) version
• SFW (System Firmware) version
• EFI (Extensible Firmware Interface) version
Example 5-3 Sample hpia64info utility output
Format: 1
MP Version: F.01.55
MP Lan Status: Enabled
MP Host Name: superbird
MP IP Address: 16.89.144.239
MP Netmask: 255.255.252.0
MP Gateway: 16.89.144.1
MP MAC Address: 00-14-C2-9C-07-6C
Asset Tag: hello world
BMC Version: 05.07
SFW Version: 01.31
EFI Version: 05.37
hpqlarep
Synopsis
hpqlarep
Description
The hpqlarep utility enables or disable the EFI or BIOS boot setting on QLogic 2G or 4G HBAs.
Options
hpqlarep /s filename saves the HBA configuration to filename.
hpqlarep /l filename loads the HBA configuration to filename
Format
The configuration file for EFI boot setting has the following format:
• For 2G HBAs
[HBA0] ; section for each HBA - HBA No
WWID=11223344 ; read-only variable - HBA WWPN
74 Utilities Reference