Tower to Rack and Rack to Tower System Conversion Guide

Converting a Tower System to a Rack System
Process for Converting Your Tower System to a Rack System
Step 3: Removing the System’s Pedestal
Here are the steps required to remove the tower system’s pedestal:
1. Remove the pedestal mounting screws and slide the pedestal in the direction of the
large arrow. See Figure 1-6.
Figure 1-6 Remove the Pedestal Mounting Screws
Slide the pedestal in the direction of the large arrow.
Mounting Screws
Retaining Posts and Slots
Pedestal
2. Remove the pedestal from the system’s chassis. See Figure 1-7.
Figure 1-7 Removing the Pedestal
Retaining Posts
Retaining Slots
10
Chapter 1