Tower to Rack and Rack to Tower System Conversion Guide

Converting a Rack System to a Tower System

Process for Converting Your Rack System to a Tower System

Step 5: Removing the System’s Access Panel

You need to remove the access panel to gain access to the system’s internal components.

Here are the steps required to remove the access panel:

1. Rotate the access panel’s blue release lever toward the back of the system and slide

the cover toward the back of the system. See

Figure 2-6.

Figure 2-6 Slide the Access Panel toward the Back of the System’s Chassis

2. Lift the access panel off the system’s chassis. See Figure 2-7.

Figure 2-7 Lift the Access Panel off of the System’s Chassis

Chapter 2