Tower to Rack and Rack to Tower System Conversion Guide

Converting a Rack System to a Tower System
Process for Converting Your Rack System to a Tower System
2. Replace fans 1A, 1B and 2 that were removed in step 1 in this section with HP Part
Number A7231-04017. See Figure 2-10.
Figure 2-10 Replace Fan Modules 1A, 1B and 2
1a. Replace Fan 1A
2a. Replace Fan 1B
3a. Replace Fan 2
1b. Connect Fan 1A’s
power connector
2b. Connect Fan 1B’s
power connector
3b. Connect Fan 2’s
power connector
3. Align the access panel’s front edge with the alignment mark on the optical drive’s
bay area and slide the access panel toward the front of the system. The access panel
is properly secured when the panel’s blue release lever latches in place. See
Figure 2-6 and Figure 2-7.
22
Chapter 2