Tower to Rack and Rack to Tower System Conversion Guide

Converting a Rack System to a Tower System
Process for Converting Your Rack System to a Tower System
4. Position the front access panel at an approximate 45 degree angle with the front of
the system and insert its retaining slots onto the retaining tabs located on the
system’s chassis. See
Figure 2-16. Rotate the front access panel inward until it snaps
in place.
Figure 2-16 Install the Front Panel
Access
Retaining Tabs
Retaining Slots
Front of
System
Front
Panel
5. Connect all of the system’s power and external cables and turn the system on.
26
Chapter 2