Windows #002: Smart Setup Guide

Installing the OS
Installing from a local console
Chapter 3
32
Installing from a local console
This task involves using EBSU to prepare the server, using Windows Setup to prepare
the OS, loading the OS on the server, and specifying system settings.
Run EBSU
EBSU provides an easy-to-use interface to flash the firmware, partition the hard disk,
install diagnostic tools, configure storage controllers, and run other EFI utilities.
Step 1. Power on the server. The server boots to EFI.
Figure 3-1 Boot to EFI
Step 2. Load the HP Smart Setup media into the server DVD drive.
Step 3. From the EFI Boot Menu, select
Internal Bootable DVD and press Enter.
Step 4. EBSU starts and displays the Welcome screen. Select
OK and press Enter to continue.
Figure 3-2 Enter EBSU