Windows #002: Smart Setup Guide

Installing the OS

Installing from a local console

Chapter 3

Step 5. From the main menu, select Express Setup and press Enter.

Figure 3-3 Select Express Setup

Step 6. EBSU displays the Express Setup introduction. Press Enter to continue.

Step 7. EBSU displays the firmware update screen, listing each device, its installed firmware

version, and the firmware version on the Smart Setup media. Select the device(s) whose

firmware you want to update. To continue, select

Next and press Enter.

Figure 3-4 Update firmware

NOTE You may not be able to use EBSU to flash the firmware of some devices. You cannot flash

the firmware if the installed version is the same or higher than the version on the Smart

Setup media. Also, you cannot use EBSU to flash the Management Processor (MP)

firmware. You must download the latest MP firmware from the HP Integrity support site

(http://www.hp.com/support/itaniumservers/) and flash it separately.