Windows #002: Smart Setup Guide

Installing the OS
Installing from a remote console
Chapter 3
39
Installing from a remote console
Installing from a remote console involves booting from the HP Smart Setup media,
running EBSU, launching Windows Setup, loading OS files to the boot disk, and then
booting the server from the boot disk.
To install the OS using the remote console:
Run EBSU
EBSU provides an easy-to-use interface to flash the firmware, partition the hard disk,
install diagnostic tools, configure storage controllers, and run other EFI utilities.
Step 1. Power on the server. The server boots to EFI.
Figure 3-12 Boot to EFI
Step 2. Load the HP Smart Setup media into the server DVD drive.
Step 3. From the EFI Boot Menu, select
Internal Bootable DVD and press Enter.
Step 4. EBSU starts and displays the Welcome screen. Select
OK and press Enter to continue.
Figure 3-13 Enter EBSU