Windows Integrity nPartition Guide

Using Other Tools for Managing nPartitions
Power-, status-, and hardware-level tasks
Chapter 4
108
NOTE When you deallocate a DIMM, all other DIMMs in the echelon also will not be used the
next time the nPartition boots.
dimmconfig cell dimm OFF deconfigures the specified DIMM (dimm) on the cell (cell)
indicated.
dimmconfig cell dimm ON configures the DIMM on the cell.
Use dimmconfig cell to display the DIMM configuration for a cell.
Enter the help dimmconfig command for more details.
Step 4. Reboot the nPartition using the reset command.
Whenever changing memory configurations you must reboot the corresponding
nPartition to allow the configuration changes to take place.
Step 5. Exit the console and management processor interfaces if finished using them.
To exit the EFI environment type
^B (Control-B); this exits the nPartition console and
returns to the management processor Main Menu. To exit the management processor,
type X at the Main Menu.