Windows Integrity nPartition Guide

nPartition Commands Reference
parunlock
Chapter 5
128
-g [passwd] Allows access to the complex specified by the -h option. The accessed
complex is then considered the target complex. Access is through the
management processor LAN port.
The -h option is required if this option is used.
passwd specifies the IPMI password of the management processor. If
this field is omitted, the command prompts for the password.
-h IPaddress|hostname
This option is only used in combination with either the -u or -g option.
IPaddress|hostname specifies the IP address or hostname of the
target nPartition (-u) or management processor (-g).