Windows Integrity nPartition Guide

nPartition Commands Reference
fruled
Chapter 5
131
Step 4. Type the following to make the indicator light blink on the target cell (indicated by “1/2”,
for “cab1/cell2”), and to make the number blink on the front of the cell cabinet:
fruled -h 192.168.24.68 -g password -o -B -c 1/2
The sequence of commands and results is shown here:
C:\>parstatus -h 192.168.24.68 -g password -P
Note: The -g option may require up to 2 minutes to complete. Please wait...
[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 Active 8 5 cab0,cell4 Partition 0
1 Inactive 1 1 ? Partition 1
2 Active 2 2 cab1,cell0 Partition 2
3 Active 2 2 cab1,cell2 Frodo
4 Inactive 1 1 ? Partition 4
5 Active 2 1 cab0,cell2 Partition 5
C:\>fruled -h 192.168.24.68 -g password -C
Note: No action specified. Default behaviour is (-f).
Note: The -g option may require up to 2 minutes to complete. Please wait...
C:\>fruled -h 192.168.24.68 -g password -o -B -c 1/2
Note: The -g option may require up to 2 minutes to complete. Please wait...
C:\>