Windows Integrity nPartition Guide

Troubleshooting
Error messages and corrective actions
Chapter 6
154
Cannot determine the
state of the nPartition
Configuration Privilege.
The command cannot
retrieve this data from the
provider. In most cases,
this is caused by excessive
lost packets during data
retrieval.
Retry the command, or use a
management PC with more
reliable network
communications to the MP.
Cannot determine if the
platform is partitionable.
1. See “Unsupported
Platform” above.
2. The command cannot
retrieve this data from the
provider. In most cases,
this is caused by excessive
lost packets during data
retrieval.
1. See “Unsupported
Platform” above.
2. Retry the command or use
a management PC with
more reliable network
communications to the MP.
Cannot write the Stable
Complex Configuration
Data.
Cannot write the
Partition Configuration
Data.
Unable to update the
Stable Complex
Configuration Data.
The referenced data is
inaccessible or was left in
a locked state. See the
AEL entry for more
information.
If the data was left locked,
use the parunlock
command to unlock it. See
“parunlock” on page 127, or
the on-line help for the
parunlock command.
Cannot lock Stable
Complex Configuration
Data.
Unable to read lock for
partition.
Cannot lock Partition
Configuration Data.
Cannot lock cell data for
cell <n>.
The referenced data was
locked when the command
attempted to access it.
First retry the command.
The data is normally locked
only for short periods. If the
data remains locked, use the
parunlock command to
unlock it. See “parunlock” on
page 127, or the on-line help
for the parunlock command.
Table 6-1 nPartition commands messages (Continued)
Message Cause Recommended Action