Windows Integrity nPartition Guide

Introduction
Performing nPartition management tasks
Chapter 1
27
Performing nPartition management tasks
This section provides an overview of common nPartition management tasks.
Listing the status of an nPartition or complex
To list server complex hardware details and nPartition configuration details:
Using the Partition Manager
Nearly every aspect of the complex — the status of its nPartitions, cells, and other
hardware — can be viewed on a single page from within Partition Manager. To access
this information:
Step 1. Open a web browser and enter the URL for the web server supporting the target system.
Step 2. At the login page, enter a username and password and click Login to access the System
Management Homepage (SMH). This may take several minutes as information about
the complex is loaded.
Step 3. Go to the SMH Tools tab and click the Partition Manager link in the “nPartition
Management” box.
Step 4. In the Partition Manager’s Home tab, use a menu path of
Complex > Show Complex
Details
to produce a summary of the status and configuration of the complex, its
nPartitions, cells, and hardware.
Using the nPartition commands
nPartition Commands for listing hardware and nPartition status are as follows:
parstatus -C
List cell configurations.
parstatus -V -c#
List detailed cell information.
parstatus -I
List I/O chassis and card slot details.
parstatus -B
List server cabinet summaries for the complex.
parstatus -V -b#
List detailed server cabinet status.
parstatus -X
List product and serial numbers.
parstatus -P
List a configuration summary for all nPartitions.
parstatus -V -p#
List detailed nPartition configuration information.
parstatus -w
List the local nPartition number.