Windows Integrity nPartition Guide

Installing nPartition Management Utilities
Partition Manager
Chapter 2
36
• If you are installing onto a 32-bit client machine that will be used to remotely
administer the target server, click on HP nPartition Commands Bundle for
Windows XP or Windows Server 2000/2003.
• If you are installing onto the target server itself, click on HP nPartition
Commands Bundle for Windows Server 2003 on Itanium-based systems.
Step 5. At the top of the next page, click on the Download button.
Step 6. In the File Download window, click Run.
Step 7. In the Security Warning window, click Run.
Step 8. In the HP Package Setup window, click Install.
Step 9. In the command window, press any key to begin the installation.
Step 10. When the installation finishes, press any key again to exit and close the command
window.
Partition Manager
This section is an overview of the installation and use of the nPartition Commands
bundle and nPartition Manager bundle. The nPartition Commands bundle must be
installed before the nPartition Manager bundle.
Install Partition Manager Bundle from the Smart Setup media
Before installing the Partition Manager bundle you must install the nPartition
Commands bundle first, as described in the previous section.
To install the nPartition Manager bundle, complete the following steps:
Step 1. Insert the Smart Setup CD and click on the Software tab.
Step 2. In the left column, click on the model number of your target server.
Step 3. In the left column of the next page, click on the Partitioning Tools link.
Step 4. In the “Partitioning Tools” section, click on HP Partition Manager Bundle for
Windows.
Step 5. At the top of the next page, click on the Download button.
Step 6. In the File Download window, click Run.
Step 7. In the Security Warning window, click Run.
Step 8. In the HP Package Setup window, click Install.
Step 9. In the command window, press any key to begin the installation.
Step 10. In the HP System Management Homepage (SMH) installation wizard screen, click Next.