HP Smart Array 5300 Controller User Guide

Upgrading and Replacing Options
Two- to Four-Channel Adapter Board
To remove the existing two- to four-channel adapter board:
1. Remove the screw that secures the two- to four-channel adapter board. This
screw is reachable from the back of the controller board.
Figure 8-9: Removing the securing screw
8-8 HP Smart Array 5300 Controller User Guide
HP CONFIDENTIAL
Writer: Kimberly Koch File Name: i-ch8 upgrading and replacing options.doc
Codename: SilverHammer Part Number: 135606-006 Last Saved On: 3/13/03 1:59 PM