Installation Guide, Third Edition - HP Integrity rx2620 (August 2006)

Introduction

Server Components

Chapter 1

System Board Manageability

• Baseboard Management Controller (BMC)

• Temperature monitoring and fan regulation by BMC

• BMC manageability console shared with system console and general purpose serial port

• Intelligent platform management interface (IPMI) protocol for communication between

BMC/system/integrated lights out (iLO) manageability card

• BMC hardware diagnostics display on the front status panel

• Locator front and rear LEDs

• Field replacement units monitoring by BMC

• Serial port for local and modem console

• Wake-on-LAN and Alert-on-LAN capabilities from the 10/100/1000 BT LAN port

Enhanced Server Manageability Using the Integrated Lights Out Management

Processor

The integrated Lights Out Management Processor (iLO MP) provides the ability to manage and monitor

many of the server’s processes and functions, including:

• Web Graphical User Interface (GUI)

• LAN telnet console

• Web console

• Serial port for local console

• Serial port for modem console

• Duplication of console screen content across all consoles

• VGA and 2D graphics display

• Advanced Features:

— Secure Shell (SSH) access

— Group actions through the HP Systems Insight Manager (HPSIM)

— Directory-based authentication and authorization (LDAP)

Hard Disk Drives

The following hard disk drives are supported by the rx2620 server:

• 36 GB 15K HotPlug Ultra320 SCSI drive

• 73 GB 15K HotPlug Ultra320 SCSI drive

• 146 GB 10K HotPlug Ultra320 SCSI drive

• 300 GB 10K HotPlug Ultra320 SCSI drive

The server holds up to three hard disk drives.