Installation Guide, Third Edition - HP Integrity rx2620 (August 2006)

Chapter 3

Installing Additional Components

Removing and Replacing the Top Metal Cover

Replacing the Top Metal Cover

CAUTION Secure any wires or cables in your server so they do not get cut or interfere with the

replacement of the top metal cover.

Step 1. Align the front edge of the top metal cover with the alignment mark on the optical drive bay. See

Figure 3-3 for more information.

Figure 3-3 Aligning the Top Metal Cover

Step 2. Grasp the blue release lever and slide the top metal cover toward the front of the system until the

lever snaps into place. See Figure 3-4 for more information.

Figure 3-4 Closing the Top Metal Cover

Step 3. Lock the top metal cover and return the key to its stored position.

To replace cover,

align front edge here

then slide forward

Front of server