Installation Guide, Third Edition - HP Integrity rx2620 (August 2006)

Chapter 3
Installing Additional Components
Installing an Additional Processor
50
Figure 3-18 Processor Location on System Board
CAUTION Ensure that the cache size is identical for all processors. Failure to observe this caution will
result in system failure.
Ensure that all processors are rated for use at the same speed. Failure to observe this caution
will result in performance degradation.
Valid processors are identified in the Parts Information chapter of the HP Integrity rx2620
Maintenance Guide.
Step 7. Remove the top metal cover if not already removed. See “Removing the Top Metal Cover” on
page 35.
Step 8. Remove the processor airflow guide. Figure 3-19 shows how to remove the processor airflow guide.
a. Remove the IDE cable and power module cables from the processor airflow guide cable clips.
CAUTION Record the cable routing of these cables to ensure the cables are returned to their
correct routes.
b. Hold the guide using the opening on top of the guide.
CPU 0
slot
CPU 1
slot
Front of server