Installation Guide, Third Edition - HP Integrity rx2620 (August 2006)

Chapter 3
Installing Additional Components
Installing an Additional Processor
52
Step 10. Use the two alignment pins on the processor to properly align the processor on the system board.
The two alignment pins fit in the alignment holes on the system board processor mount. The turbo
fan power cable must be positioned so that it is located on the side of the heatsink that faces the
front of the server. Figure 3-21 shows the alignment pins on the processor.
Figure 3-21 Alignment Pins on Processor
Figure 3-22 shows the alignment holes on the system board for the CPU 1 slot.
Figure 3-22 Aligning the Processor
Alignment pins
Front of server
Front of server
Alignment holes