Installation Guide, Third Edition - HP Integrity rx2620 (August 2006)

Chapter 3
Installing Additional Components
Installing an Additional Processor
53
Step 11. Use the special processor tool (P/N 5069-5441) shipped with your replacement processor assembly
to lock the processor in place on the system board. To do this, insert the special processor tool
through the turbofan blades into the lock, and rotate it clockwise 180 degrees. Figure 3-23 shows
how to lock the processor in place.
Figure 3-23 Locking the Processor Module in Place
Step 12. Slide the sequencing retainer plate toward the front of the system. Figure 3-24 shows how to slide
the sequencing retainer plate into place.
Figure 3-24 Slide the Sequencing Retainer Plate
Front of server
Processor tool
Front of server