Rack to Tower and Tower to Rack System Conversion Guide (June 2005)

Chapter 3
Converting a Rack System to a Tower System
Process for Converting Your Rack System to a Tower System
17
Installing the System’s Access Panels
Here are the steps required to install the access panels on the tower system:
Step 1. Locate of the top access panel retaining hooks and their associated retaining slots on the
system’s chassis. You must align the retaining snaps with their retaining slots. See
Figure 3-8.
Figure 3-8 Locate the Top Access Panel’s Retaining Snaps and Slots
1
2
1
2
3
3
4
5
4
5
Hooks
Hooks
Slots
3a. Top panel hooks for
front of system
Front of
System
1a. Top panel hooks for
back of system
2a. Top panel hooks for
middle of system
3b. Chassis slots for
front of system
1b. Chassis slots for
back of system
2b. Chassis slots for
middle of system
Slots