Rack to Tower and Tower to Rack System Conversion Guide (June 2005)

Converting a Tower System to a Rack System

Process for Converting Your Tower System to a Rack System

Chapter 4

Step 3. Rotate the blue release handle toward the back of the system and slide the internal panel in the

direction of the arrow. See Figure 4-2 a. Next, lift the access panel off of the system’s chassis. See

Figure 4-2 b.

Figure 4-2 Removing the Internal Access Panel

Step 4. Use the indentation on the top edge of the front access panel and pull outward to un-snap and

rotate it away from the system. See Figure 4-3. After an approximate 45 degree rotation, lift the

front access panel upwards and off of the two lower retaining tabs.

Figure 4-3 Removing the Front Access Panel

Step 5. Press in on the top panel’s retaining snap to release it and slide the top panel toward the back of the

system’s chassis. See Figure 4-4.

a. Slide Access Panel

in the direction of arrow

b. Lift Access Panel off of

the system’s chassis

Retaining Tabs

Front

Access

Panel

Retaining Slots