Rack to Tower and Tower to Rack System Conversion Guide (June 2005)

Figures
5
Figure 3-1. Remove the Front Access Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 3-2. Unscrew the Left-side Rack Latch Bracket’s Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 3-3. Remove the Left-side Rack Latch Bracket’s Retaining Tab from Its Slot . . . . . . . . . . . 14
Figure 3-4. Unscrew the Left-side Rack Latch Bracket’s Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 3-5. Remove the Right-side Rack Latch Bracket’s Retaining Tab from Its Slot . . . . . . . . . . 15
Figure 3-6. Place the Pedestal Retaining Slots on their Retaining Posts . . . . . . . . . . . . . . . . . . . . . 16
Figure 3-7. Install the Pedestal Mounting Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 3-8. Locate the Top Access Panel’s Retaining Snaps and Slots . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 3-9. Slide the Top Access Panel onto the System’s Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 3-10. Install the Left-side and Right-side Access Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 3-11. Install the Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Figure 4-1. Removing the Left-side and Right-side Access Panels. . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 4-2. Removing the Internal Access Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Figure 4-3. Removing the Front Access Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Figure 4-4. Slide the Top Access Panel Toward the Back of the System’s Chassis . . . . . . . . . . . . . 23
Figure 4-5. Lift the Top Access Panel off of the System’s Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 4-6. Remove the Pedestal Mounting Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Figure 4-7. Removing the Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Figure 4-8. Inserting the Left-side Rack Latch Bracket’s Retaining Tab into Its Slot . . . . . . . . . . 25
Figure 4-9. Connecting the Left-side Mounting Bracket to the System’s Chassis . . . . . . . . . . . . . 25
Figure 4-10. Inserting the Right-side Rack Latch Bracket’s Retaining Tab into Its Slot . . . . . . . . 26
Figure 4-11. Connecting the Right-side Rack Latch Bracket to the System’s Chassis . . . . . . . . . . 26
Figure 4-12. Installing the Right Front Access Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27